Products
Contact Us
- Contact Person : Mr. Dai Yonghong
- Company Name : Eddysun (Xiamen) Electronic Co., Ltd.
- Tel : 0592-2223833-13606015133
- Fax : 0086-592-2237091
- Address : Fujian,Xiamen,Floor 7, No.23, Wanghai Road, Software Park
- Country/Region : China
- Zip : 361008
EEC-39 Multi-frequency Eddy Current Tester
Product Detailed
Related Categories:Testing Equipment
Related Product Searches:EEC-39 Multi-frequency Eddy Current Tester,High Quality,Eddy Current Tester, Testing Equipment,EEC-39
Eddy Current Tester
1.Full-digital, multi-frequency
2.Test conductive materials
3.Measure coating thickness
4.Multi-channel
Related Product Searches:EEC-39 Multi-frequency Eddy Current Tester,High Quality,Eddy Current Tester, Testing Equipment,EEC-39
Model | EEC-39 Multi-frequency Eddy Current Tester |
Type | Intelligent eddy current tester |
Technical Parameters | Four eddy current frequencies Frequency range from 64 Hz to 5 MHz8 eddy current testing channels3 Signal mixing capabilities Adjustable gain from 0 to 90dB in 0.5dB steps360 degrees phase shift can be varied in steps of 1 degreeColored real-time display of x-y impedance plane and/or strip chart signalsA-scan and C-scan displaysDisplay 4-simultaous x-y signals 2 strip chart signalsIndependent vertical to horizontal display scaling ratio adjustable from 0.1 to 10All instrument settings are shown on the display. Digital filter Special alarm areas adjustable from 1 to 8 Fast electronic balancingSignal phase and amplitude auto measurement functionsFour connectors are provided for differential, absolute and reflection type probes. Alarm can be set to trigger 17. All of the testing signals can be recorded and stored by hard-disk of computer 18. It can be set in 2 sets of testing systems with 4 frequencies and 4channels, and connect with 2 probes and testing at the same time |
Application | It is designed for real-time effective detection in metal materials, thickness measurement and sorting materials by metallurgical differences, and weld inspection.It allows you to detect multiple types of defects simultaneously, such as surface and sub-surface flaws, for faster, easier inspection.It can get the eddy current information of defection and the thickness of tube wall at the same time, so it is used to test conductive materials and measure the coating thickness.The signals from two frequencies can be mixed to suppress unwanted signals, improving the signal-to -noise ratio.The audio, visual and logic output alarms can determined flaw conditions. Real-time C-scan display helps you to differentiate between multiple layers and determine flaw orientation. |
EEC-39 Multi-frequency Eddy Current Tester
Other products
